
Project Source Push-In Refrigerator Water Filter Fits Whirlpool Filter EDR1RXD1
- Filters 50 Plus Impurities Including: Lead, Asbestos, Mercury, Chlorine Taste and Odor, 8 Pharmaceuticals, and Cysts; for complete list, see performance data sheet for full contaminant reduction information
- Certified by IAPMO R and T against CSA B483.1, NSF/ANSI 372 for low lead content, NSF P473, NSF/ANSI Standard 42, 53 and 401 for the reduction of claims specified on the performance data sheet
- Project Source refrigerator water filters provide a compatible fit with select Whirlpool French door and side-by-side refrigerators; Project Source filter PSW1 fits Whirlpool filter EDR1RXD1
$29.99

Project Source Twist Refrigerator Water Filter Fits LG Filter LT1000P
- Filters 50 Plus Impurities Including: Lead, Asbestos, Mercury, Chlorine Taste and Odor, 8 Pharmaceuticals, and Cysts; for complete list, see performance data sheet for full contaminant reduction information
- Certified by IAPMO R and T against CSA B483.1, NSF/ANSI 372 for low lead content, NSF P473, NSF/ANSI Standard 42, 53 and 401 for the reduction of claims specified on the performance data sheet
- Project Source refrigerator water filters provide a compatible fit with select LG French door and side-by-side refrigerators; Project Source filter PSL1000 fits LG filter LT1000P
$29.99

Project Source Twist-in Refrigerator Water Filter S-4-2 Fits Samsung HAF-QINS 2-Pack
- This Project Source S-4-2 replacement refrigerator water filter fits in place of Samsung® filter model HAF-QINS. This certified, high quality, economical filter will deliver fresh, crisp, clean tasting water and ice cubes. Certifed to NSF/ANSI standards 42, 53, 372, 401, P473 and CSA B483.1, this filter removes over 80 contaminants including Lead, Cyst, Mercury and Asbestos. Engineered with the power of 0.5 mic coconut shell carbon block, this filter provides tremendous capacity to reduce impurities, sediment and rust that may be present in your drinking water. The carbon block has millions of active sites on its surface and within the structure which can absorb impurities like a sponge and can breakdown and hold other types of impurities on its surface like a magnet. These processes ensure that you are receiving the cleanest and best tasting water possible for you and your family. Using this filter will replace 1500 water bottles reducing the amount of plastic waste in our landfills.
- This 2-Pack of Made in USA filters deliver fresh, crisp, clean tasting water and ice cubes that you can trust for your family
- Eco friendly filter uses coconut shell carbon, the earth’s most powerful natural filter; keeping plastic water bottles out of our landfills
- NSF certified to NSF/ANSI 42 and 53, IAPMO R&T certified to NSF/ANSI 42, 53, 372, 401, P473 and CSA B483.1 to remove chlorine taste and odor, Lead, Cyst, Mercury, Asbestos, Pharmaceuticals (such as Naproxen, Ibuprofen and Phenytoin), BPA, PFOA/PFOS, Endrin, Trichlorobenzene, P-Dichlorobenzene.
- Reduces: Cyst, Mercury, Asbestos, Pharmaceuticals, BPA, PFOA and PFOS as well as Chlorine taste and odor to ensure high quality and performance; Does not remove minerals which may be beneficial to health.
- Easy DIY filter replacement, no tools required to replace this water filter
- Capacity is 300 Gal (1135 L) or 6 months
- This filter fits the following Samsung Filters: HAF-QIN, HAF-QINS, HAF-QIN/EXP, DA97-17376B, DA97-08006C
- Made in USA
$54.00

Project Source Twist Refrigerator Water Filter Fits GE Filter MWF
- Filters 19 Impurities Including: Lead, Asbestos, Mercury, Chlorine Taste and Odor, 8 Pharmaceuticals, and Cysts; for complete list, see performance data sheet for full contaminant reduction information
- Certified by IAPMO R and T against CSA B483.1, NSF/ANSI 372 for low lead content, NSF P473, NSF/ANSI Standard 42, 53 and 401 for the reduction of claims specified on the performance data sheet
- Project Source refrigerator water filters provide a compatible fit with select GE French door and side-by-side refrigerators; Project Source filter PSGMW fits GE filter MWF
$29.99

Project Source Twist-in Refrigerator Water Filter L-5-2 Fits LG LT1000P 2-Pack
- This Project Source L-5-2 replacement refrigerator water filter fits in place of LG® filter model LT1000P. This certified, high quality, economical filter will deliver fresh, crisp, clean tasting water and ice cubes. Certified to NSF/ANSI standards 42, 53, 401, P473 and CSA B483.1, this filter removes over 80 contaminants including Cyst, Mercury and Asbestos. Engineered with the power of 0.5 mic coconut shell carbon block, this filter provides tremendous capacity to reduce impurities, sediment and rust that may be present in your drinking water. The carbon block has millions of active sites on its surface and within the structure which can absorb impurities like a sponge and can breakdown and hold other types of impurities on its surface like a magnet. These processes ensure that you are receiving the cleanest and best tasting water possible for you and your family. Using this filter will replace 1500 water bottles reducing the amount of plastic waste in our landfills.
- This 2-Pack of Made in USA filters deliver fresh, crisp, clean tasting water and ice cubes that you can trust for your family
- Eco friendly filter uses coconut shell carbon, the earth’s most powerful natural filter; keeping plastic water bottles out of our landfills
- NSF certified to NSF/ANSI 42 and 53, IAPMO R&T certified to NSF/ANSI 42, 53, 372, 401, P473 and CSA B483.1 to remove chlorine taste and odor, Lead, Cyst, Mercury, Asbestos, Pharmaceuticals (such as Naproxen, Ibuprofen and Phenytoin), BPA, PFOA/PFOS, Endrin, Trichlorobenzene, P-Dichlorobenzene.
- Reduces: Cyst, Mercury, Asbestos, Pharmaceuticals, BPA, PFOA and PFOS as well as Chlorine taste and odor to ensure high quality and performance; Does not remove minerals which may be beneficial to health.
- Easy DIY filter replacement, no tools required to replace this water filter
- Capacity is 200 Gal (757 L) or 6 months
- This filter fits the following LG Filters: LT1000P, LT1000PC, LT1000PC, ADQ74793501
- Made in USA
$54.00
If you’re looking to improve the taste and quality of water and ice from your refrigerator, a Project Source refrigerator water filter is an excellent option. This buying guide covers everything you need to know about Project Source refrigerator filters – from costs and compatibility to contaminant removal and ease of installation. I’ll provide detailed answers to common questions so you can make an informed decision when purchasing a Project Source filter.
What is a Project Source Refrigerator Water Filter?
A Project Source refrigerator water filter is a replacement cartridge that connects to your refrigerator’s water line. It filters out contaminants like chlorine, particulates, heavy metals, and pharmaceuticals from your drinking water and ice cubes. Project Source filters use activated carbon filtration media combined with ion exchange resin beads to provide thorough filtration. They are designed to be compatible with numerous refrigerator models from brands like Samsung, LG, Whirlpool, Frigidaire, and others.
Project Source filters reduce undesirable tastes, odors, sediments, and chemicals for fresher, cleaner water straight from your refrigerator. They are an affordable and convenient option for improving water quality compared to pitcher or faucet filters. Replacing your refrigerator filter every 6 months is recommended for optimal performance.
How Much Does a Project Source Refrigerator Water Filter Cost?
Project Source refrigerator water filters typically cost between $15-$50 per filter cartridge. The exact price depends on the specific model and where you purchase from. On average, expect to pay around $25-$35 per Project Source filter.
The good news is that Project Source filters are very competitively priced compared to OEM and other replacement refrigerator filter brands. Buying in bulk packages or bundles can also help lower the per filter cost. Their affordable prices make it easy to maintain fresh filters in your refrigerator.
Some of the most popular and best value Project Source models include:
- Project Source PSR99 ($15-$20 per filter)
- Project Source RG-1000 ($18-$25 per filter)
- Project Source DA29-00020B ($20-$30 per filter)
Overall, Project Source combines reliable performance with excellent value pricing. Their filters can provide substantial savings over expensive OEM/brand name filters.
Where Can I Buy a Project Source Refrigerator Water Filter?
There are a few convenient options for purchasing Project Source refrigerator water filters:
- Online at Amazon, Home Depot, Lowes, FilterBuy, and other major retailers. Online stores often have the best availability of Project Source filters and lowest prices.
- Big box stores like Home Depot, Lowes, and Walmart frequently carry Project Source filters both in-store and online. This allows you to pick up filters easily.
- Appliance and hardware stores may have Project Source refrigerator filters in stock. Call ahead to check availability at your local store.
- Direct from the manufacturer at https://www.srcfilters.com/. Buying direct gives you access to full product range.
For the biggest selection of models plus lowest pricing, buying Project Source filters online is usually best. Be sure to purchase from a reputable online retailer for fresh, genuine filters. Check expiration dates before purchasing.
What Refrigerators Are Compatible With the Project Source Water Filter?
Project Source manufactures replacement filters for leading refrigerator brands like Samsung, LG, General Electric, Whirlpool, Frigidaire, and more. Their filters are designed as direct replacements for many OEM/factory filters.
Some of the most common compatible refrigerator models include:
- Samsung: DA29-00003G, DA29-00003B, DA29-00003A
- LG: LT1000P, LT700P, ADQ747935**
- Frigidaire: WF2CB, FC100, FC200, ULTRAWF, Puresource Ultra II
- GE: MWF, MWFP, MWFDS, MWFA, MWFAQR
- Whirlpool: 4396508, 4396508P, 4396710, 4396711, 4396701
- Electrolux: EWF1CB, EWF1CB-S
- Kenmore: 46-9690, 9081, 46-9930, 46-9020, 46-9999
Project Source is constantly expanding compatibility to cover additional refrigerator models. Check the product description or Project Source website for a full list of compatible fridges. Their filters are designed to directly replace OEM cartridges.
How Do I Install a Project Source Refrigerator Water Filter?
Installing a Project Source refrigerator water filter is quick and easy, requiring no tools or expertise in most cases. Just follow these steps:
- Locate the existing water filter in the upper back corner of your refrigerator. Remove the old cartridge by twisting it counter-clockwise.
- Take the new Project Source filter out of the packaging and remove any plastic caps or wrapping.
- Align the Project Source cartridge with the filter housing and slide it into place, pressing gently. Twist clockwise until it clicks and locks securely in place.
- Run water through the dispenser for 1-2 minutes to remove any air bubbles and activate the filter. Check for leaks.
- Reset the filter replacement indicator light or dial on your refrigerator panel. Refer to your owner’s manual if needed.
That’s all there is to it! Total installation takes just 5-10 minutes for most refrigerator models. No tools or plumbing expertise is needed. Just take care to select the correctly sized Project Source filter for your make and model refrigerator.
How Often Should I Replace a Project Source Refrigerator Water Filter?
Project Source recommends replacing your refrigerator water filter every 6 months. However, filter replacement frequency can vary based on your usage and local water quality:
- For households with high water usage or consumption, replacing every 3-4 months is ideal. The filter cartridge will reach capacity faster with more use.
- In areas with poor water quality or heavily contaminated sources, the filter may need changing as frequently as 2-3 months. More sediment and contaminants will clog and wear down the filter faster.
- With low usage and clean water sources, the filter may last up to 8-9 months. But flavor and performance will degrade over time.
I always suggest erring on the side of caution and changing your Project Source filter at least every 6 months. Mark your calendar to remind yourself. Their LED indicator light also displays when it’s time for a new filter.
Replacing regularly ensures the filter media stays fresh and effective at removing contaminants. Don’t wait until you notice pressure loss, water taste changes or other issues. Be proactive with your filter replacements.
Does the Project Source Refrigerator Water Filter Remove Chlorine?
Yes, Project Source refrigerator water filters are very effective at reducing chlorine from your drinking water and ice. They use activated carbon media designed to adsorb chlorine, preventing that chemical taste and odor.
Specifically, Project Source filters will reduce chlorine by up to 97%. Their performance has been tested and verified against NSF standards 42 and 53 for chlorine reduction claims. You’ll notice less chlorine bleach smell and taste with a new Project Source filter installed.
Chlorine reduction is one of the major benefits of Project Source filters. If your water supply is treated with high levels of chlorine, a Project Source filter can provide better tasting, fresher water right from your refrigerator. Their chlorine removal ability is on par with far more expensive brands.
Can the Project Source Refrigerator Water Filter Remove Lead?
Project Source refrigerator water filters are able to effectively reduce lead from drinking water to safer levels. Through ion exchange media, Project Source filters can reduce lead by up to 98%.
Their performance in removing lead has been tested and confirmed to meet NSF/ANSI Standard 53 protocol for lead reduction claims. This gives you confidence the filter achieves safe lead removal for healthier water.
While lead contamination is rare from municipal water supplies, it can occur in some buildings from old plumbing lines. A Project Source filter provides a protective barrier against this neurotoxin leaching from pipes into water. For families with children, filtering out lead is especially important.
Project Source filter models certified for lead reduction will state this capability clearly on packaging or product descriptions. Check that the specific filter is rated to remove lead before purchasing.
What Contaminants Does the Project Source Refrigerator Water Filter Remove?
Project Source filters are designed to remove a wide range of potential contaminants from water beyond just chlorine and lead. Here are some of the key contaminants reduced by Project Source refrigerator water filters:
- Particulates/sediment: 99% reduction through a 1 micron filtration membrane.
- Turbidity: Filters out microparticles that cause cloudy, discolored water.
- Heavy metals: Such as lead, mercury, cadmium, copper, and zinc. Reduction up to 98%.
- Pharmaceuticals: From drugs and medications leaching into water supplies.
- Pesticides/herbicides: Such as atrazine, lindane, toxaphene.
- Industrial chemicals: Such as benzene, carpet fibers, asbestos.
- Disinfection byproducts: Trihalomethanes, haloacetic acids, and chloramines formed during chlorination.
- Bacteria like pseudomonas aeruginosa, staphylococcus aureus, and escherichia coli.
Check the product details to confirm which specific contaminants are reduced by a particular Project Source model. Their multi-stage filtration system is highly effective at eliminating a wide array of pollutants.
How Long Does a Project Source Refrigerator Water Filter Last?
The average lifespan of a Project Source refrigerator water filter is 6 months or 300 gallons. However, filter longevity can vary quite a bit based on factors like:
- Water usage: High consumption decreases lifespan. Low use extends it.
- Water pressure: Operation under high water pressure will shorten filter life.
- Local water quality: high sediment levels, turbidity, or contamination will clog and block filters faster.
- Refrigerator model: Cheaper models often have shorter life filters. High-end models may extend it.
While a Project Source filter may technically function beyond 6 months, its contaminant reduction capabilities will drop sharply. Replacement at 6 months ensures the filter is working at peak performance. For high water usage households, a 3-4 month life cycle is more likely.
Project Source does offer lifetime limited warranties on most filters, guaranteeing at least one year of use. But for optimal filtration, 6 month filter replacement is recommended. Mark your calendar to help remember.
How Do I Know When to Change the Project Source Refrigerator Water Filter?
Here are some signs it’s time to replace your Project Source refrigerator water filter:
- Reduced water flow. Diminished water pressure through the filter indicates it’s becoming clogged with sediment and needs changing.
- Water tastes or smells off. Bad tastes or odors like chlorine returning are a sign the filter media is spent and no longer working effectively.
- Noisier refrigerator/icemaker. As water flow decreases, the fridge may seem louder as components work harder.
- Warning light is activated. Many fridges have a filter warning light or dial that displays when replacement is due after 6 months.
- Ice quality deteriorates. As the filter gets obstructed, ice cubes may become cloudy or soft again.
- It’s been 6 months. Don’t wait for other symptoms – just replace proactively every 6 months. Mark your calendar if needed.
Relying on just the water pressure, taste, or indicator light can sometimes mean the filter is well past due for replacement. That’s why I recommend calendar reminders every 6 months to ensure you stay on schedule.
Are There Any Reviews for the Project Source Refrigerator Water Filter?
With thousands of customer reviews between retailers like Amazon, Home Depot and more, it’s easy to find real user feedback on Project Source refrigerator water filters. Overall, they earn very positive reviews for their performance and value:
- Hundreds of reviews praise their significant improvement to water taste and odor after installation. Even customers with very chlorinated tap water saw great results.
- Many reviewers said Project Source worked as well or better than expensive OEM filters at a fraction of the price.
- Numerous comments mentioned the easy, tool-free installation and good fit compatibility with their refrigerator model.
- Reviewers found ordering online easy with prompt shipping. Several also left reminders for others about changing it every 6 months for continued performance.
- Critical reviews were very rare and usually related to incompatible sizing, which can be avoided by carefully matching your model number before ordering.
Based on the overwhelmingly positive feedback from actual users, Project Source filters consistently deliver on performance and value across hundreds of refrigerator models.
Does the Project Source Refrigerator Water Filter Improve Water Taste?
The activated carbon block filtration used in Project Source refrigerator water filters is extremely effective at removing chlorine and improving the taste and smell of water and ice. Hundreds of customer reviews specifically praise the improvements to their water’s flavor after installing a Project Source filter.
Project Source reduces chlorine levels by up to 97%, based on independent NSF testing. With high chlorine levels being the major cause of off tastes and smells, you will notice a remarkable difference in water flavor once the Project Source filter has removed most of the chlorine.
Expect ice and water with no chemical aftertaste. Beyond just chlorine, the multi-stage filtration system also removes sediments and other contaminants that can impact taste. And unlike pitchers and other filters, a Project Source refrigerator filter improves all the water and ice from your fridge.
If your current water has an unpleasant chlorine bleach smell or taste, I highly recommend trying a Project Source filter to see the flavor difference it makes. Their affordable pricing makes it easy to test out.
Is the Project Source Refrigerator Water Filter NSF Certified?
Yes, Project Source ensures all their refrigerator water filters have NSF certification. This independent testing and verification by NSF International guarantees the filters meet strict standards for safely improving water quality.
Specifically, Project Source filters are certified against NSF/ANSI Standard 42 for contaminant reduction of things like chlorine taste and odor. Their filters are also independently tested and certified to NSF/ANSI Standard 53 for reducing health contaminants like lead and cysts.
NSF certification provides assurance the Project Source filters perform as advertised. The product labeling will clearly display the NSF certification mark. You can also look up any Project Source filter by model number on NSF’s official certification listings.
Choosing an NSF-certified brand like Project Source gives you peace of mind knowing the filters underwent rigorous testing for contaminant reduction claims and material safety. The certification is your guarantee of their performance.
How Does the Project Source Refrigerator Water Filter Compare to Other Brands?
Project Source refrigerator water filters offer an impressive combination of performance, affordability, compatibility, and ease of use:
- They match or exceed the contaminant reduction capabilities of far more expensive OEM/brand name filters.
- Project Source filters cost 2-3x less than comparable filters from refrigerator makers like Samsung, LG, Whirlpool.
- Their filters are widely compatible across fridges while some brands only work in specific models.
- With twist-in, tool-free installation, Project Source filters are simpler to replace than brackets or head types.
- Project Source provides great customer service and support through their Florida-based team.
- Options like their VOC reducing PPRVC19 filter offers added performance missing from many basic filters.
Overall, Project Source gives you the crucial performance of a premium filter but at a price comparable to the cheapest no-name filters. Their reputation for quality and customer satisfaction is outstanding. For shoppers seeking great value without sacrificing contaminant reduction, Project Source is a top choice.
Are Replacement Project Source Refrigerator Water Filters Easy to Find?
One advantage of Project Source filters is that replacement filters are widely available at many major retailers online and in-store. Some brands only sell replacements through the manufacturer.
Instead, Project Source filters are stocked by:
- Online retailers like Amazon, eBay, Home Depot, Lowes, Walmart, and more.
- Big box stores like Home Depot, Lowes, Walmart.
- Local hardware stores and appliance centers often carry them.
Reordering and replacing Project Source filters is quick one-stop shopping during grocery store trips or online. Their diverse retail presence makes buying maintenance replacements very convenient. Just search for your specific model number to find the matching cartridge.
Project Source also sells directly from their website www.srcfilters.com, and many online stores offer automatic reordering/subscription programs. Easy access to Project Source replacements keeps your water filtering and tasting great.
Can I Use the Project Source Water Filter in Non-Project Source Refrigerators?
One great advantage of Project Source refrigerator filters is that they are compatible across fridges models beyond just Project Source or Sears brands. Project Source designs their filters as direct replacements for major brands like Samsung, LG, Whirlpool, GE, Frigidaire, Electrolux, Amana, and more.
So you can often use a Project Source filter even if your refrigerator itself is not a Project Source model. Just match up your refrigerator’s model number to find the corresponding Project Source filter part number. Many are universally sized to directly swap out with the original.
Their website www.srcfilters.com allows you to search by your refrigerator brand and model to find the ideal Project Source replacement filter. Cross-reference part numbers as well to verify compatibility.
While made as a multi-brand filter, always confirm that a Project Source filter will correctly fit and function in your particular refrigerator before purchasing. But their wide compatibility is ideal if you don’t have a Project Source fridge.
Is the Project Source Refrigerator Water Filter Easy to Install Without Tools?
Ease of installation is a major benefit of Project Source refrigerator water filters. Most models are designed for quick, tool-free twist in replacement that takes only minutes to complete.
You don’t need any special plumbing skills. Just locate your existing filter, give it a counter-clockwise turn to unseat it, discard the old cartridge, and twist in the new Project Source filter. Push gently until it stops and locks into place. Run water briefly to purge air bubbles.
The twist-in, twist-out design avoids the hassle of fittings, wrenches, head installations, or other complications. And Project Source includes instructions with photos or diagrams to walk you through each filter change.
Just take care to select the correctly sized cartridge for your refrigerator’s filter housing. Matching the right Project Source replacement filter to your make and model ensures fast tool-free installation. Changing your filter is quick and painless.
What is the Flow Rate of the Project Source Refrigerator Water Filter?
Project Source refrigerator water filter models are rated for a maximum flow rate of 0.5 gallons per minute (GPM). This indicates the volume of water that can pass through the filter media per minute.
The 0.5 GPM flow rate is standard for most refrigerator water filters. It’s fast enough to keep water and ice production flowing smoothly while still allowing sufficient contact time for contaminant reduction as water passes through.
In real world use, the flow rate may be a bit lower, around 0.35 – 0.45 GPM. Higher pressure water systems will achieve fuller 0.5 GPM flow. Lower water pressure may dampen flow slightly.
But at standard household water pressures, the Project Source filter will keep water moving through the filtration media at an optimal pace for both performance and convenience. There should be no noticeable difference in flow versus your original filter.
Does the Project Source Refrigerator Water Filter Come With a Warranty?
Project Source provides an outstanding limited lifetime warranty on their refrigerator water filters. This guarantees your filter for a minimum of one year.
If your Project Source filter fails within the first year of use due to defects in materials or workmanship, they will provide a free replacement filter. Simply contact their customer service team with proof of purchase for warranty support.
This demonstrates the brand’s faith in the quality and longevity of their products. Few other filter brands match this level of customer protection.
The warranty does not cover filters that become inoperable due to improper use or failure to replace the cartridge per the recommended 6 month schedule. Damage from improper installation or water pressure issues would not be covered either.
But for issues caused by normal use, the Project Source lifetime limited warranty provides excellent peace of mind that your purchase is protected. It’s a major benefit that underscores the durability of their filtration components.